TROTTER 125

Offering true multi-crop baling the TROTTER is a reliable, easy to use and maintain baler. It produces balers 4-ft tall and 4-ft wide. TROTTER series features a 79 in. (87 in optional) pickup and many feeding systems (rotor or cutter). Its unique 18 steel rolls bale chamber moves through the thickest windrows with ease.

Version Pick up width (cm) Maximum bale diameter (cm) Power Needed (HP)
PTO (rpm)
125 220 125 52 540
125 TOPCUT 220 125 65 540
125 ULTRACUT 220 125 72 540
  • 16/18 rolls chamber
  • Compression: mechanical (available with manual adjustment)
  • Constant velocity PTO shaft
  • Torque limiter bolt
  • Two jakcs hydraulic lifting pick-up
  • Cutting unit with hydraulic control for Trotter 100 TOPCUT
  • TROTTER 100 power system: rotor
  • TROTTER 100 TOPCUT power system: rotor with 10 blades cut 3 in.
  • Mechanical pressing bale (manual adjustment in 7 positions)
  • PTO free wheel 540 rpm (available with free wheel 540 rpm)
  • Road light
  • Tires: 11.5 to 15
  • No. 2 single-acting hydraulic valves are required on the tractor
  • Twine, net or twine+net binding system
  • Bale mechanical press (7 positions manual adjustment)
  • Multi-function electronic control unit
  • Cutting system: “Feraboli cut system”
  • Pick-up hydraulic lifting system
  • Bale mechanical press (7 positions manual adjustment)
  • Kit bale ejector
  • Automatic chain oiling kit
  • II° net roll housing kit
  • Increase for hydraulic brakes version
  • Trotter ejector kit
  • Oiler trotter kit
  • 2 rolls-trotter net twine kit
  • II° net roll housing kit
  • Binder film kit (available only for version with net binder)
  • Increase for tires 400-15 version
  • Increase for hydraulic brakes version
  • Increase for pick-up 87 in.
  • ACCESSORIES TOPCUT
  • Fake knife kit
  • ACCESSORIES ULTRACUT
  • Fake knife ultracut kit
BALE CHAMBER Open Close

DSC9037

BALE CHAMBER

 

To compress the crop into bales with a consistent size and density, the baling process has to be as effective as possible while being gentle on the crop. The 18 heavy-duty rollers equipped with a unique ribbed profile provide optimal traction and compression. The rollers are formed from high-grade tubular steel and heavy-duty bearings mounted on cast iron housing and firmly bolted outside the bale chamber.

 

 

PICK-UP Open Close

trotter 125 livrea nuova TOM

PICK-UP

 

TROTTER round balers offer high performance 79 in. or 87 in. (optional) wide pickups, that feature closely spaced steel tines to make sure all of the crop is collected from the windrow. Both pickups are hydraulically raised from the cab as standard equipment and equipped with galvanized strippers for extended lifespan and four tine bars for high-capacity picking.

 

 

ULTRACUT ROTOR Open Close

foto 35

ULTRACUT ROTOR

 

When it comes to harvesting fine-chop silage, operator versatility and productivity – no other pickup can surpass the ULTRACUT (available with TROTTER 125 ULTRACUT). It features 25 knives to produce short cuts that pay off quickly by higher bale densities, and enhanced silage quality.

 

 

CONVEYOR CLUTCH Open Close

foto 17

CONVEYOR CLUTCH

 

The conveyor stops during the bale unloading process to avoid any damage. A mechanically-driven clutch stops the conveyor when the tailgate opens. Thanks to this system the conveyor chain stress is reduced and the baler noise is decreased.

 

 

FEEDER SYSTEM Open Close

foto 34

FEEDER SYSTEM

 

TROTTER 125 feeding system features with an alternative feeding system with 16 tines have 2¾ in. spacing. The large clearance between the pickup and chamber preserves crop structure (i.e., highly-nutritive leaves) and improves hay and straw quality, limiting clogging.

 

 

ADJUSTABLE CAM CLUTCH Open Close

foto 31

ADJUSTABLE CAM CLUTCH

 

MASCHIO FIX CHAMBER Series offers even more versatility due to the adjustable tine position.
The operator can turn the pickup cam to improve feeding efficiency for straw or wet crops:
• By moving the tines closer to the rotor the fork feeding is improved in dry conditions.
• By moving the tines away from the rotor, the pickup capacity is increased in wet or sticky conditions: no clogging issues!

 

 

CUTTER ROTOR Open Close

foto 24

CUTTER ROTOR

 

TROTTER 125 CUT model is equipped with 13 cutter knives positioned in a double spiral near the rotor for superior cutting quality. Special knives can be added on the cutter in order to disengage the chopping system.

 

 

Request Form