TERREMOTO 3
51-185 kW (70-250 HP)
SPRING - SHEAR BOLT CULTIVATOR
RIGID FRAME
The evoluti on of Maschio’s tines cultivator concept is embodied in the TERREMOTO 3, “3” as its wide spaced (730 mm) ranks of elements. High soil clearance (900 mm) and wide spacing between shanks of the same rank, allow higher speeds of work (10 km/h) with no risk of clogging. Particular tips and deflectors get always a good soil till up to 25 cm. Intense action on first layer always gets a good grade of soil refi nement and residues burying.
| Version |
 |
Working depth
 |
Tines (N.) |
Working width
 |
Road Width
 |
Discs (⌀/N.) |
|---|---|---|---|---|---|---|
| 230 | 51-95 / 70-130 | 25 | 7 | 230 | 230 | 6 |
| 300 | 62-110 / 85-150 | 25 | 10 | 300 | 300 | 8 |
| 350 | 110-132 / 150-180 | 25 | 12 | 350 | 350 | 8 |
| 400 FOLDING | 126-185 / 170-250 | 25 | 13 | 400 | 300 | 8 |
- Universal three point hitch, cat. III N
- 80 mm-wide points (up to 25 cm working depth)
- X-pattern 80 mm-wide deflectors for intensive mixing effect
- Straight tines with safety-bolt or spring-damper
- Spring leveling bar with telescopic side springs
- Rear harrow for TERREMOTO-3 230
- Rear harrow for TERREMOTO-3 300
- Rear harrow for TERREMOTO-3 350
- Disc leveling bar with telescopic side discs for TERREMOTO-3 300
- Straight 80 mm-wide deflectors for well-structured soils
- 100 mm-wide points - up to 20 cm working depth
- 310 mm-wide wings - for shallower working depths
Frame and tines
To give extreme strength to the structure, frame is built with large section square beams (100 x 100 mm). Frame clearance of 900 mm from soil and tines disposed on three lines make this machinery suitable even with a very large quantity of crop residues.
Leveling system
Elastic-tines or discs bar behind anchors levels ridges produced from tillage, preparing soil for subsequent action of rear roller.
Operating unit
The tip design, side wings and deflector make on soil a high disturbance, producing optimal seedbed refinement and residues mixing. Worn-out side wings can be replaced with a quick-fit bolt system.
Tillage adjustments
Tillage depth is adjustable through pins limiting anchors soil penetration. Leveling bar and rear roller are linked with a parallel connection to simplify adjustment operations and get same incidence for both elements.
Optional spring dampener
Standard machine is equipped with safety bolt device to prevent any damage coming from collision with large rocks or debris into soil. To operate in stony conditions is available a no-stop system with adjustable spring dampener, allowing user to reduce downtimes.
