Fotoğraf & Video Galerisi

Youtube kanalımızı ziyaret edin



PALMA è un braccio decespugliatore professionale adatto allo sfalcio di erba, arbusti e cespugli, sia in campo che per manutenzione stradale. Disponibile in 3 versioni - 500, 600 e 720T - quest'ultima dotata di sfilo telescopico per avere grande sbraccio mantenendo una macchina compatta.

Versiyon Extension (cm) Standard Shredder head Weight (KG) Min. Tractor weight (KG) Power (HP) Hyd Oil Rotor (rpm) rotor Ø peripheral max Hydraulic engine
500 505 120/05 1000 2300 60 170 3000 430 40
600 610 120/05 1200 3000 70 170 3000 430 40
720T 745 120/05 1400 3500 80 200 3000 430 58
  • Independent hydraulic circuit with high-efficiency cast iron gear motor and pumps.
  • Max. 540 rpm PTO
  • Cast iron overdrive with high-efficiency category 3
  • Cast iron coupling with 2 inlets for pumps on independent shafts (on 720 version)
  • High resistance hydraulic pipes, protected by metal guard and shockproof/splashproof spiral wrapping
  • Hydraulic valve system operated by flexible cables and control unit with mechanical levers
  • Pre-engineered space for future installation of the heat exchanger
  • High-strength chassis pre-engineered for 3-point hitching to cat. II power lifts
  • Ground pins made of hardened and heat treated steel
  • Wear-resistant bushings with lubricating nipple
  • Lift truck connections
  • 120 cm bidirectional floating cutting head (PALMA 500, 600)
  • 130 cm bidirectional floating cutting head (PALMA 720T)
  • Safety hydraulic system with hydropneumatic dampenere and max safety valve on the rotation hinge cylinder
  • Safety valve for unloading in case of rotor blockage
  • PTO shaft and pair of third-point connections
  • Safety lever to prevent the rotor from reverse spin
  • Cutting head angle 220°
  • "CE" equipment
  • Heat exchanger (PALMA 720 T)
  • Heat exchanger
  • Lighting kit
  • Brackets
  • Proportional Electric Joy-Stick JSPE (PALMA 500, 600)
  • Proportional Electric Joy-Stick JSPE (PALMA 720T)
  • Proportional hydraulical Joy-Stick JSPH (PALMA 500, 600)
  • Proportional hydraulical Joy-Stick JSPH (PALMA 720T)
  • Pump and engine with closed circuit pistons (only with belt type side head engine transmission; see cutting head page)
Cutting head Open Close

cutting hedge3

Cutting head

Head of hedge cutters permits maximum working flexibility, thanks to its rotation angle of 220°; balanced rotor warrants absence of vibrations. 

Iron cast coupler Open Close

iron cast coupler

Iron cast coupler

This device splits power from PTO on two independent shafts moving pumps for rotor and hydraulic circuit. This solution makes possible use hedge cutter even in heavier condition with maximum reliability.

Safety systems Open Close

shock absorber

Safety systems

In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.  

A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.

Reversible rotor Open Close

anti inversion lever

Reversible rotor

It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.

Contour Following System (CFS) Open Close


Contour Following System (CFS)

Floating head allows user to follow uneven ground contours without acting on motion control. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.  

Strong junctions Open Close


Strong junctions

All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.

Cast Iron rotor gear pump Open Close

iron cast pump

Cast Iron rotor gear pump

Cast iron made gear pump is more resistant to high temperatures comparing to aluminum: this technical choice is suited to professional use under intense and stressing work conditions.

Hydraulic shut off Open Close

shut off cocks

Hydraulic shut off

Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.

Talep formu