Foto & Video Gallery


INTERLINHA MÍNIMA 13 cm - Semeador estreito
INTERLINHA MÍNIMA 23 cm - Semeador largo

O elemento ORIETTA, disponível nas duas versões N e W, é configurável com vários tipos de rodas e acessórios para melhor adaptáloaos diversos terrenos e distâncias entre filas.

  • Chassis tubolar
  • Engate de 3 pontos com 1° ou 2° pontos oscilantes, cat. II
  • Elemento de sementeira com balancim
  • Roda de transmissão 5.00 - 15 reguláveis
  • Disco de sementeira, roda de compressão (incluídos)
  • Sistema de selecção de duplo controlo
  • Mola de aligeiramento
  • Turbina
  • Aspirador de sementes
  • Vacuómetro
  • Manómetro
  • Cardan 1'3/8 Z6-Z6 (Comprimento 700)
  • Nas encomendas precisar as seguintes medidas:
  • Largura do chassis, interlinha e distância de sementeira
  • Via do tractor e do semeador
  • Os preços indicados são calculados com um equipamento composto por roda farmflex e disco de sementeira com 90 orifícios e com o diâmetro de 0,8 mm
  • Máquina com dupla caixa de velocidades


Adjustable seed covering system Open Close

adjustable seed covering

Adjustable seed covering system

On the field, without the use of tools, you can easily rotate the seed cover by hand to adapt furrow closure to the soil condions.

Vacuum disc cleaning and emptying system Open Close


Vacuum disc cleaning and emptying system

Vacuum is created by a PTO driven vacuum blower. The big diameter blower with 16 outlets runs at a slower speed, providing the same amount of vacuum pressure at the seed meter. The use-friendly sliding knob lets the operator regulate the vacuum level depending on the veggie to be planted. A convenient vacuum gauge located on the planter hitch gives a visual indication of the vacuum level from the cab. A standard secondary air system cleans out plugged disc holes blowing pressurized air to the backside of the seed plate. This air flow is previously purified from dust and debris by the standard filter. The vacuum emptying system allows you to easily clean out the hoppers and distributors from unused seeds. The flexible hose is connected to the vacuum blower and collects seeds in the hopper place on the 3-point hitch.



Toolbar Open Close

20140317 Orietta 3


Gaspardo offers a full line of frame options; Rigid, folding, telescopic or stacker frames are only some of the different toolbars available. The innovative folding mechanism of the stacker toolbar hydraulically lifts the outer wings over the center section, keeping the seed and chemical hoppers upright for transport. When in the planting mode, the Hydraulic Compensation System permits the planter to hug rolling soil and maintaining accurate seed depth. Combining this flexibility with the ability to fold for transport in sec, you have a multi-veggie planting system designed to get to the field and get the job done.

Gearbox Open Close



Large diameter drive-wheels are adjustable on height in order to lift up the toolbar when planting on raised bed. Thanks to two pre-loaded springs each drive wheels can set in floating position ensuring a smooth seed disc revolution even on wet patches, ditches or extremely uneven terrain. The 36 ratio gearbox provides an infinitely variable population settings (from ⅕ inch and 21 ½ inches.) which allow the operator to achieve the picket fence stands that competitors do not offer. Setting changes can be made easily, without tools.

Coulter adjustments Open Close


Coulter adjustments

ORIETTA- planting unit Open Close


ORIETTA- planting unit

ORIETTA vegetable planter series features with a single distributor and four different shoes: single, double, triple or strip row shoes. The row unit is available in two versions: narrow (N) and wide (W). The N-row configuration allows minimum inter-row spacing of 14 cm, W-row version the minimum row spacing is 23 cm. The N and W configurations are convertible.

Parallelogram connection and press wheels Open Close


Parallelogram connection and press wheels

Each row unit is mounted on sturdy parallelogram linkage in order to provide great vertical travel and minimal twisting and bending effects. All pivoting points feature with self-lubricating bushings for maintenance-free performance. The 10 inches diameter front and rear press wheels are connected by a self-balancing system to follow every soil profile and minimize depth variation. Many types of press wheelsare available (stainless, soft or rigid rubber, mash metal) with adjustable and individual mud scrapers for clogging-free operations.



Large diameter seed plates Open Close

Gdischi di semina ORIETTA3

Large diameter seed plates

The stainless steel seed disc can have a single, double or triple row of holes with a wide range of hole number (up to 180) diameters (from 0.5 mm) for every seed size from lettuce to cucumber. The discs have a large diameter and they rotate more slowly than other vacuum meters improving spacing precision and reducing parts wearing. Seed pick-up starts at the at the 4 o’clock position. Seed is exposed to the seed cell for a longer period of time, providing superior seed singling. Superior seed pick-up is provided as the combination of rotating agitator and the anti-overflow plate.


Documento Peso Tipo
7.8 MB pdf