martina 425x280

Фотографии и видео галерея



MARTINA è adatta a trattori di media potenza e con massa fino a 2800 kg, per un uso continuativo dello sfalcio di fossati e argini. MARTINA 600T ha il braccio telescopico con uno sfilo di 800mm che permette un'apertura fino ai 6,4 m, ideale per lavori di manutenzione stradale in spazi non molto ampi.

версия Extension (cm) Standard Shredder head ВЕС (кг) Min. Tractor weight (KG) Мощность трактора (л.с.) Hyd Oil Rotor (rpm) rotor Ø peripheral max Hydraulic engine
MARTINA 500 470 120/05 830 2200 60 170 3000 430 40
MARTINA 595 595 120/05 950 2800 60 170 3000 430 40
MARTINA 600 T 640 120/05 950 2800 65 170 3000 430 40
  • Independent hydraulic circuit with high-efficiency cast iron gear motor and pumps.
  • Max. 540 rpm PTO
  • Aluminium overdrive with high-efficiency category 3 (MARTINA 500)
  • Cast iron overdrive with high-efficiency category 3 (MARTINA 600T)
  • High resistance hydraulic pipes, protected by metal guard and shockproof/splashproof spiral wrapping
  • Hydraulic valve system operated by flexible cables and control unit with mechanical levers
  • Pre-engineered space for future installation of the heat exchanger
  • High-strength chassis pre-engineered for 3-point hitching to cat. II power lifts
  • Ground pins made of hardened and heat treated steel
  • Wear-resistant bushings with lubricating nipple
  • Lift truck connections
  • Bidirectional floating cutting head
  • 600 version with telescopic extension
  • Safety system with first arm "OVER CENTER"
  • Safety hydraulic system with hydropneumatic dampenere and max safety valve on the rotation hinge cylinder
  • Safety valve for unloading in case of rotor blockage
  • PTO shaft and pair of third-point connections
  • Safety lever to prevent the rotor from reverse spin
  • Cutting head angle 246°
  • "CE" equipment
  • Lighting kit
  • Heat exchanger
  • Brackets
  • Proportional Electric Joystick JSPE (MARTINA 500)
  • Proportional Electric Joystick JSPE (MARTINA 600T)
Cutting head Open Close

cutting hedge4

Cutting head

Head of hedge cutters permits maximum working flexibility, thanks to its rotation angle of 246°; balanced rotor warrants absence of vibrations. 

Contour Following System (CFS) Open Close


Contour Following System (CFS)

Floating head allows user to follow uneven ground contours without acting on motion control. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.  

Strong junctions Open Close


Strong junctions

All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.

Reversible rotor Open Close

anti inversion lever

Reversible rotor

It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.

Hydraulic shut off Open Close

shut off cocks

Hydraulic shut off

Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.

Cast Iron rotor gear pump Open Close

iron cast pump

Cast Iron rotor gear pump

Cast iron made gear pump is more resistant to high temperatures comparing to aluminum: this technical choice is suited to professional use under intense and stressing work conditions.

Safety systems Open Close

shock absorber

Safety systems

In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.  

A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.