LARA

TRITURADORA BRAZO HIDRÁULICO TRASERO PROFESIONAL CON ENGANCHE ALTO

LARA è un braccio decespugliatore professionale adatto allo sfalcio di erba, arbusti e cespugli, per l'agricoltura e la manutenzione stradale. Grazie ad attacco alto e doppio sfilo telescopico, raggiunge i posti più distanti mantenendo comunque una macchina compatta durante i lavori di routine.

Versión Extensión (cm) Cabezal Peso (KG) Mín Peso Tractor (KG) Potencia (HP) Aceite hidr. Rotor (rpm) Ø periférico rotor Pot. máximo mot. hidr
850 T 820 125/05 1540 4500 100 220 3000 450 58
  • Circuito hidraúlico independiente con bomba y motor de engranajes de alto rendimiento en fundición
  • TDF 540 max. Rpm
  • Acople en fundición con dos tomas por bomba con ejes independientes
  • Mangueras hidráulicas de alta resistencia con protección metálica y espiral envolvente de plástico anti-latigazos y anti-salpicaduras
  • Distribuidor hidráulico con control mediante cables flexibles y control con palancas mecánicas
  • Pre-instalación para radiador
  • Bastidor de la resistencia preparado para el enganche 3 puntos del elevador de II cat
  • Pernos retificados in acero bonificado y tratado termicamente
  • Casquillo antidesgaste con engrasador
  • Enganche carretilla elevadora
  • Cabezal flotante bidireccional 130 cm
  • Sistema de seguridad en 1º brazo con válvula “OVER-CENTER”
  • Sistema de seguridad hidráulico con amortiguador hidroneumático, y válvula de máxima en cilindro de rotación
  • Safety valve for unload in case of rotor block Válvula de seguridad para descarga en caso de bloqueo del rotor
  • Cardán y par de tirantes tercer punto
  • Palanca de seguridad anti-reversión rotación del rotor
  • Cabezal ángulo 246°
  • Equipamientos “CE”
  • Kit luces
  • Intercambiador de calor
  • Soportes
  • Joy-Stick proporcional eléctrico JSPE
  • Joy-Stick proporcional eléctrico JSPH
  • Bomba y motor a pistones (solo con transmisión a correas)
Cutting head Open Close

coltelli a spirale3

Cutting head

Head of hedge cutters permits maximum working flexibility  thanks to its rotation angle of 200°. Spiral disposition of blades guarantees a smooth mulching action with very low vibration.

Iron cast coupler Open Close

iron cast coupler

Iron cast coupler

This device splits power from PTO on two independent shafts moving pumps for rotor and hydraulic circuit. This solution makes possible use hedge cutter even in heavier condition with maximum reliability.

Safety systems Open Close

shock absorber

Safety systems

In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.  

A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.

Reversible rotor Open Close

anti inversion lever

Reversible rotor

It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.

Contour Following System (CFS) Open Close

CFS

Contour Following System (CFS)

Floating head allows user to follow uneven ground contours without acting on motion control. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.  

Strong junctions Open Close

hinges

Strong junctions

All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.

Cast Iron rotor gear pump Open Close

iron cast pump

Cast Iron rotor gear pump

Cast iron made gear pump is more resistant to high temperatures comparing to aluminum: this technical choice is suited to professional use under intense and stressing work conditions.

Hydraulic shut off Open Close

shut off cocks

Hydraulic shut off

Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.

Download

Documento Peso Tipo
2.7 MB pdf