Foto & Video Gallery



El modelo GIGANTE dispone de gran capacidad operativa y consiguiente elevada productividad combinados con un bastidor plegable para un fácil transporte en carretera. Autonomía elevada y ti empos muertos reducidos al mínimo, junto al preciso sistema de distribución elevan la eficiencia a los máximos niveles.

Anchura de trabajo
400 100-134 / 135-180 396 18 (15) 5520 2840
500 115-149 / 155-200 504 18 7090 3410
600 134-175 / 180-235 594 18 7340 3410
  • Trasmisión eléctrica - sistema GENIUS
  • Sembradora neumática con 2 dosificadores centrales y distribución neumática de la semilla
  • Versión remolcada enganche de 2 puntos III^ cat.
  • Accionamiento de la turbina con circuito hidraulico dependiente del tractor
  • Carro de transporte de elevación hidráulica con ruedas 400/60 - 15.5
  • Elemento de siembra amortiguado independiente
  • Ruedas cubresemillas independientes
  • Tolva con mirilla de control nivel semillas
  • Grada cubresemillas Ø 12 de elevación hidraúlica
  • Contenedor prueba de siembra y de descarga
  • Iluminacion interior tolva
  • Kit luces
  • Kit rascadora de tungsteno limitador profundidad 70 mm
  • Distribuidores hidráulicos para tractor:
  • Versiones remolcadas: de 3 a 4
  • Rodillos dosificadores: G1000 montado, F25-125 sueltos, G 1002 para abono montado
  • Rodillo adicional G1000 para transformar de abonadora a sólo semilla
  • Capacidad tolva:
  • Versión 400, 2390 l (Semilla 1575 l, abono 815 l)
  • Versión 500-600, 3180 l (Semilla 2080 l, abono 1100 l)
  • Marcador no incluido
  • Sensor velocidad GPS
  • Cable conexión al radar del tractor
  • Tramlines cierre elecrico 2+2 Dosificación eléctrica - suministrado desmontado
  • Tramlines cierre elecrico 2+2 Dosificación eléctrica - montado
Penetration capability Open Close

penetrazione e solco stretto diretta

Penetration capability

The capacity of penetration in difficult conditions is given by the large notched disc (475 mm/18.7in diameter) and thanks to the reduced angle of action creates a groove very thin, thus giving reduced disturbance to the soil. The disks are connected to the frame using heavy arms and sturdy cast steel. Thanks to the hydraulic hitch the transport wheels raise totally off of the ground during field work causing maximum penetration of the units. The spring structure perpendicular to the ground allows the element to follow even very irregular shapes and to keep constant pressure applied to the soil.

Rubber gauge wheel Open Close

diretta rubber unit

Rubber gauge wheel

The rubber gauge wheel systems is for the farmer who like to make adjustments to the seed depth often.  We can do this with a pin adjustment on the side of the unit.  The rubber gauge wheel system is not as suitable as the cast iron unit in very wet heavy soil type conditions.

Seed depth control Open Close

controllo profondit diretta G

Seed depth control

Thanks to the seeding depth control made of cast steel you will have no problem maintaining a constant depth even in the harshest conditions. The depth limiter is made of a hard cast steel thus helping with the penetration of the disc while making sure that your seed depth is uniform producing an even emergence. Due to weight of the unit we have no problem working well in rocky conditions.  Even wet conditions are not a problem with our tungsten carbide scrapers to keep the heavy soil away from the openers and limiters.

Seeding depth limiters Open Close

depth limiter diretta G

Seeding depth limiters

To vary the depth from 5cm/2in to 3cm/1in all you have to do is change the limiter on the side of the disc.  

Furrow closing system Open Close

chiusura solco diretta

Furrow closing system

The closure of the narrow furrow is obtained by a tapered wheel mounted on an arm independent of the unit itself.  This allows for the wheel to move independently of the unit,  running beside the furrow so that there will not be to much compaction over the furrow.  The closing system works very well in rocky conditions. 

Seed and Fertilizer Open Close

tramoggia divisa seme concime

Seed and Fertilizer

The special design of the seed and fertilizer combined drill allows you to optimize the amount of fertilizer used thus reducing overall fertilizer cost.  Our combination unit also reduces the number of passes needed to go over the field.  This will reduce compaction and overall fuel and labor costs.  When comparing our fertilizer distribution to that of a spreader on uneven terrain our drill will give you a uniform application where a spreader unit cannot achieve such results.




• The unit makes possible the distribution of seed and fertilizer with different granulate size, even in high quantities (theoretical maximum 350 kg/ha seed and 550 kg/ha fertilizer) in relation to sowing width and operation speed.

• Distribution unit is enclosed in cast aluminum with rust-proof stainless steel and polyethylene components.

• Continuous dosing variation by means of the gearbox.

• Large diameter roller for low rotation speed to guarantee precise distribution.

• Seed loading cells arranged in helical pattern to achieve a more even distribution.

• Feelers for precise distribution without damaging the seeds and knock-out of foreign bodies.

• Easy disengagement to avoid damages of pulpy and fragile seeds.

• Cleaning unit for oily seeds.

• Distribution roller for small seeds with independent distribution rings to better manage different seed typology and rates.

• Easy hopper empting

2 point hitch Open Close

2 point hitch

2 point hitch

Our cast two point hitch allows for easy hookup and great versatility in the field because of the multiple pivot points.


Documento Peso Tipo
655 KB pdf