GGIGANTEPRESS2

Photo & Video Gallery

Visit our Youtube channel

GIGANTE PRESSURE

PNEUMATIC SEED DRILL FOR DIRECT SEEDING OF CEREALS
HYDRAULIC CLOSING FRAME
VERSION 400 ROAD TRANSPORT WIDTH m 3,00
VERSION 500-600 ROAD TRANSPORT WIDTH m 3,20

GIGANTE PRESSURE is a pneumatic seed drill with folding frame for an easy transport and working widths of 4, 5 and 6 m. The no-till drill units are independent and reinforced for better durability and efficiency. Thanks to two independent spring loaded arms, the unit achieve both a uniform seeding depth and a proper seed furrow closure, applying a high down pressure (up to 260 kg). For a better seed growth, GIGANTE PRESSURE is equipped for seed and fertilizer distribution. The ISOBUS GENIUS MASTER system connects the electric transmission seeder (ISOBUS) with the tractor.

Version
Working width
cm
ROWS DISTANCE (CM) Weight (KG) Tank capacity (LITRES)
400 100-134 / 135-180 396 18 (15) 5520 2840
500 115-149 / 155-200 504 18 7090 3410
600 134-175 / 180-235 594 18 7340 3410
  • Electric dosing - isobus GENIUS MASTER system
  • GPS Speed detection device
  • Pneumatic seed drill with 2 centralized distributors and pneumatic seed delivery
  • Trailed version: 2 point hitch, cat. III
  • Hydraulically lifted transport trolley with500/45 - 22.5 wheels
  • Fan drive with tractor-oil dependent system
  • Dampened, indipendent planting unit
  • 70 mm depth limiters tungsten soil scraper
  • Independent seed press wheels
  • Hopper with window for seed level check
  • Ø 12 mm seed covering harrow with hydraulic lifting
  • Calibration and emptying tray
  • Electronic balance in scale
  • Inspection light
  • Lighting kit
  • Warning boards 

 

  • Centralized system greasing kit 22 rows
  • Centralized system greasing kit 28 rows 
  • Centralized system greasing kit 33 rows
  • Electronic tramlines simple 2+2 electrical dosing 
  • Additional kit for closing 
  • Seeding control system 22 rows 
  • Seeding control system 26 rows 
  • Seeding control system 28 rows 
  • Seeding control system 33 rows 
  • Seeding control system 33 rows 
  • Seeding control system 40 rows 

 

Penetration capability Open Close

penetrazione e solco stretto diretta

Penetration capability

The capacity of penetration in difficult conditions is given by the large notched disc (19 in. diameter) and thanks to the reduced angle of action creates a groove very thin, thus giving reduced disturbance to the soil. The disks are connected to the frame using heavy arms and sturdy cast steel. Thanks to the hydraulic hitch the transport wheels raise totally off of the ground during field work causing maximum penetration of the units. The spring structure perpendicular to the ground allows the element to follow even very irregular shapes and to keep constant pressure applied to the soil.

Rubber gauge wheel Open Close

diretta rubber unit

Rubber gauge wheel

The rubber gauge wheel systems is for the farmer who like to make adjustments to the seed depth often.  We can do this with a pin adjustment on the side of the unit.  The rubber gauge wheel system is not as suitable as the cast iron unit in very wet heavy soil type conditions.

Seed depth control Open Close

controllo profondit diretta G

Seed depth control

Thanks to the seeding depth control made of cast steel you will have no problem maintaining a constant depth even in the harshest conditions. The depth limiter is made of a hard cast steel thus helping with the penetration of the disc while making sure that your seed depth is uniform producing an even emergence. Due to weight of the unit we have no problem working well in rocky conditions.  Even wet conditions are not a problem with our tungsten carbide scrapers to keep the heavy soil away from the openers and limiters.

Seeding depth limiter Open Close

depth limiter diretta G

Seeding depth limiter

To vary the depth from 1 to 3 in. all you have to do is change the limiter on the side of the disc.  

Furrow closing system Open Close

chiusura solco diretta

Furrow closing system

The closure of the narrow furrow is obtained by a tapered wheel mounted on an independent arm. This allows for the wheel to move independently of the unit,  running beside the furrow so that there will not be to much compaction over the furrow.  The closing system works very well in rocky conditions. 

Seed and fertilizer Open Close

tramoggia divisa seme concime

Seed and fertilizer

The special design of the seed and fertilizer combined drill allows you to optimize the amount of fertilizer used thus reducing overall fertilizer cost.  Our combination unit also reduces the number of passes needed to go over the field.  This will reduce compaction and overall fuel and labor costs.  When comparing our fertilizer distribution to that of a spreader on uneven terrain our drill will give you a uniform application where a spreader unit cannot achieve such results.

STRENGTHS OF GASPARDO SEED DISTRIBUTOR Open Close

GASPARDO SEED DISTRIBUTOR

STRENGTHS OF GASPARDO SEED DISTRIBUTOR

• The unit makes possible the distribution of seed and/or fertilizer with different granulate size, even in high quantities (theoretical maximum 276 lb/ac seed and 496 lb/ac fertilizer) in relation to sowing width and operation speed.

• Distribution unit is enclosed in cast aluminum with rust-proof stainless steel and polyethylene components.

• Continuous dosing variation by means of the gearbox.

Large diameter roller for low rotation speed to guarantee precise distribution.

Seed loading cells arranged in helical pattern to achieve a more even distribution.

Feelers for precise distribution without damaging the seeds and knock-out of foreign bodies.

Easy disengagement to avoid damages of pulpy and fragile seeds.

• Cleaning unit for oily seeds.

Distribution roller for small seeds with independent distribution rings to better manage different seed typology and rates.

Easy hopper empting

2 point hitch Open Close

2 point hitch

2 point hitch

Our cast two point hitch allows for easy hookup and great versatility in the field because of the multiple pivot points.

Request Form