GAIA
BRAZO TRITURADOR PROFESIONAL PARA ARCENES
GAIA is an hedge cutter suitable for cutting grass, shrubs and hedges, both in fields and as part of road maintenance programs. It features telescopic extension for greater reach while still maintaining machine's compact design. It features also a three sections "straddling" arm to prevent impacts with obstacles like fences or road signs.
| Versión | Extensión (cm) | Cabezal | Peso (KG) | Mín Peso Tractor (KG) | Potencia (HP) | Aceite hidr. | Rotor (rpm) | Pot. máximo mot. hidr |
|---|---|---|---|---|---|---|---|---|
| 550 | 530 | 100/03 | 1200 | 2800 | 60 | 120 | 3000 | 40 |
| 600T | 600 | 100/02 | 1200 | 2800 | 60 | 120 | 3000 | 40 |
| 650T | 615 | 100/02 | 1200 | 3200 | 80 | 170 | 3200 | 40 |
- Circuito hidraúlico independiente con bomba y motor de engranajes de alto rendimiento en fundición
- 540 rpm PTO
- Distribuidor hidráulico con control mediante cables flexibles y control con palancas mecánicas
- Mangueras hidráulicas de alta resistencia con protección metálica y espiral envolvente de plástico anti-latigazos y anti-salpicaduras
- Acople en fundición con dos tomas por bomba con ejes independientes
- Rotor a spiral
- Cabeza cortante flotante bi-direccional de 100cm
- Palanca de seguridad anti-reversión rotación del rotor
- Primer brazo flotante, auto adaptante a la superficie del suelo
- Mecanismo evita obstáculo, estructura de 3 brazos
- Bastidor de la resistencia preparado para el enganche 3 puntos del elevador de II cat
- Pernos retificados in acero bonificado y tratado termicamente
- Bujes en acero cementado rectificado
- Enganche carretilla elevadora
- Cabezal ángulo 200°
- Sistema de seguridad con el primer brazo “OVER CENTER”
- Sistema de seguridad hidráulico con amortiguador hidroneumático, y válvula de máxima en cilindro de rotación
- Protecciones “CE”
- Safety valve for unload in case of rotor block Válvula de seguridad para descarga en caso de bloqueo del rotor
- Cardán y par de tirantes tercer punto
- Bases de aparcamiento
- Intercambiador de calor
- Soportes
- Kit luces
- Joystick JSPH proporcional electro-hidráulico
- Joy-Stick proporcional eléctrico JSPE
- Bomba y motor con pistones a circuito cerrado
Reversible rotor
It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.
Contour Following System (CFS)
Floating head allows user to follow uneven ground contours without acting on motion control. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.
Strong junctions
All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.
Cast Iron rotor gear pump
Cast iron made gear pump is more resistant to high temperatures comparing to aluminum: this technical choice is suited to professional use under intense and stressing work conditions.
Hydraulic shut off
Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.
Cutting head
Head of hedge cutters permits maximum working flexibility thanks to its rotation angle of 200°. Spiral disposition of blades guarantees a smooth mulching action with very low vibration.
Iron cast coupler
This device splits power from PTO on two independent shafts moving pumps for rotor and hydraulic circuit. This solution makes possible use hedge cutter even in heavier condition with maximum reliability.
Safety systems
In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.
A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.
