MGABBIANOFNHD5

Galerie Poze & Video

GABBIANO

88-190kW (120-260HP)
MULTISPEED GEARBOX

Grapa rabatabilă GABBIANO este indicată pentru Ferme Agricole de dimensiuni mari şi medii. Fiabilă şi robustă dar având greutate mare se cuplează cu tractoare de 120 până la 240 CP. Dotată cu schimbător de viteză pentru a se adapta mai bine diverselor exigenţe de lucru

Model
Lățime de lucru
Lățime totală
Adâncime de lucru
Număr de lame
4000 88-190 / 120-260 400 406 28 32
4600 95-190 / 130-260 460 466 28 36
5000 105-190 / 140-260 500 506 28 40
6000 113-208 / 150-280 600 606 28 48
  • Central speed gearbox PTO 1000 rpm with wear PTO with phasing safety on side PTO
  • 1000 rpm PTO side gearbox
  • Pair of standard gears: 17-23
  • Rotor revolution PTO 1000 rpm: 357
  • Central PTO shaft with cam clutch (1” 3/8 Z6 or Z20 tractor side yoke) (LONG LIFE)
  • Side PTO shafts (LONG LIFE)
  • Quick PTO shaft protection removal
  • Heavy duty gear-tray with double reinforcement
  • Circular blade-holder shafts.
  • Long dampened side protections
  • Universal three point hitch, cat. II^
  • Rear lights for transport (disassembled)
  • Manual selection device for fix/upwards floating mode
  • Hydraulic folding system
  • Safety hydraulic locks for transport
  • Transport width (folded): 222 cm
  • 2 blades per rotor
  • CE safety protections
  • Rear roller with pins for depth adjustment
  • Rear levelling bar on the roller with mechanical side adjusters
  • Central eradicator
  • Universal three point hitch, cat. II hole Ø36.5
  • Kit central gearbox support lift-up
  • Pair of track eradicators with pin adjustment and safety shear bolt
  • Pair of track eradicators with pin adjustment and safety spring
  • Pair of track eradicators with DELTA tip, pin adjustment and safety spring
  • Rear roller depth indicator
  • Hydraulic roller side adjusters (supplied separately)
  • Additional 8 tubes for cage roller Ø 450 - Mod. 4000 (2 kits required)
  • Additional 8 tubes for cage roller Ø 450 - Mod. 4600 (2 kits required)
  • Additional 8 tubes for cage roller Ø 450 - Mod. 5000 (2 kits required)
  • Protection bar with steel conveyors (PLUS) 4000 (2 kits required)
  • Protection bar with steel conveyors (PLUS) 4600 (2 kits required)
  • Protection bar with steel conveyors (PLUS) 5000 (2 kits required)
  • Protection bar with steel conveyors (PLUS) 6000 (2 kits required)
Gearbox Open Close

gearbox cambio velocit

Gearbox

Main gearbox is critically important to the machine, so it is made directly by Maschio Gaspardo to ensure consistency, strength and quality. Spare gears are available on machines to change rotation speed of tines.

Heavy Duty wings’ frame Open Close

img 4telaio robusto

Heavy Duty wings’ frame

The frame of new folding power harrows has been improved to be more resistant to heavy and continuative stresses. Hydraulic cylinders have an auto balancing system to control the depth of the rear roller and make sure it always runs level.

Heavy Duty seal Open Close

paraolio poliuretano

Heavy Duty seal

The special design of seals, made of rubber and cellular polyurethane guarantees a perfect sealing and long durability.

Reinforced trough Open Close

double skin trough

Reinforced trough

Double skin structure (internal shell 6 mm, external 5 mm) increases strength, prevents torsion and protects the workings from damage

Number of rotors Open Close

img 3numero rotori

Number of rotors

25 cm spacing among the rotors gives Maschio Power Harrows more rotors than many other power harrows on the market today, it also lowers the horsepower requirement and most importantly leaves a finer seed bed.

Low vibrations Open Close

rotors power harrow

Low vibrations

The tine rotors are all positioned at different angles which allow the power harrow to gradually dig into the soil reducing the vibration transmitted to the tractor and reducing peak loads on the driveline resulting in smoother operation and less fuel consumption.

Descara

Document Dimensiune Tip
3.7 MB pdf

Formular solicitare