DIRETTISSIMA

MECHANICAL SEED DRILL FOR DIRECT SEEDING OF CEREALS (cereals-colza)

This seeder is available in two versions, mounted and towed, and its design allows an extensive application even with medium HP tractors (80/110 HP).  DIRETTISSIMA can be used both on no-till and minimum-till conditions. This model is ideal for sowing on steep pulled by crawler tractors.

版本
ROWS DISTANCE (CM) Weight (KG) ROWS NUMBER
250 58 / 80 17,8 1960 13
  • Mechanical seed drill with pair of plastic dosing rollers for small and large seeds
  • Transport wheels 10.0/75 - 15.3
  • Cam gearbox in oil bath
  • Dampened, indipendent planting unit
  • Independent seed press wheels
  • Ø 12 mm seed covering harrow with hydraulic lifting
  • Calibration control
  • Calibration and emptying tray
  • Lighting kit (supplied assembled)
  • HCS Electronic hectare counter
  • Tarpaulins for protecting distributors from damp and mud
  • 70 mm depth limiters tungsten soil scraper
  • Tractor hydraulic distributors required: Min 1 Max 2
  • Hopper capacity: DIRETTISSIMA 250 seed - 560 l
  • Draw bar kit (suggested for crawlers)
GASPARDO gearbox - Easy and precise Open Close

Sezione Cambio 3 camme

GASPARDO gearbox - Easy and precise

  • Our 3 cam transmission design allows us to acquire maximum accuracy versus many competitors that have a two cam design.
  • Calibration is very time saving using our one handle lever to set the rate.
  • All of our cams and bearings on the gearbox run in an oilbath so that you do not have to worry about greasing them.

Seeding depth limiters Open Close

depth limiter diretta G

Seeding depth limiters

To vary the depth from 5cm/2in to 3cm/1in all you have to do is change the limiter on the side of the disc.  

Penetration capability Open Close

penetrazione e solco stretto diretta

Penetration capability

The capacity of penetration in difficult conditions is given by the large notched disc (475 mm/18.7in diameter) and thanks to the reduced angle of action creates a groove very thin, thus giving reduced disturbance to the soil. The disks are connected to the frame using heavy arms and sturdy cast steel. Thanks to the hydraulic hitch the transport wheels raise totally off of the ground during field work causing maximum penetration of the units. The spring structure perpendicular to the ground allows the element to follow even very irregular shapes and to keep constant pressure applied to the soil.

Furrow closing system Open Close

chiusura solco diretta

Furrow closing system

The closure of the narrow furrow is obtained by a tapered wheel mounted on an arm independent of the unit itself.  This allows for the wheel to move independently of the unit,  running beside the furrow so that there will not be to much compaction over the furrow.  The closing system works very well in rocky conditions. 

Seed depth control Open Close

controllo profondit diretta G

Seed depth control

Thanks to the seeding depth control made of cast steel you will have no problem maintaining a constant depth even in the harshest conditions. The depth limiter is made of a hard cast steel thus helping with the penetration of the disc while making sure that your seed depth is uniform producing an even emergence. Due to weight of the unit we have no problem working well in rocky conditions.  Even wet conditions are not a problem with our tungsten carbide scrapers to keep the heavy soil away from the openers and limiters.

Rubber gauge wheel Open Close

diretta rubber unit

Rubber gauge wheel

The rubber gauge wheel systems is for the farmer who like to make adjustments to the seed depth often.  We can do this with a pin adjustment on the side of the unit.  The rubber gauge wheel system is not as suitable as the cast iron unit in very wet heavy soil type conditions.

申請表格