1981_0_diretta.jpg

Galeria zdjęć i filmów

Odwiedź nasz kanał YouTube

DIRETTA

SIEWNIK MECHANICZNY DO BEZPOŚREDNIEGO SIEWU ZBÓŻ

Modelul DIRETTA este ideale pentru însămânţarea directă pe teren nelucrat sau după o prelucrare minimă. Este o semănătoare în linie cu distribuire mecanică corespunzătoare pentru semănarea de cereale, soia, rapiţă, furajere, etc.

 

La cerere, modelul DIRETTA CORSA oferă posibilitatea de a semăna şi distribui îngrăşământ simultan: poate dispune de un coş încărcare pentru fertilizant.

Wersja
RZĘDY ODSTĘP (CM) Waga (KG) ROWS NUMBER
300 95 / 130 18-15,6 3900 17-19
400 95 / 130 18 4450 22
  • Siewnik mechaniczny z kółkami wysiewającymi do drobnych i dużych nasion
  • Wersja zawieszana: trójpunktowy zaczep, cat. III
  • Skrzynia w kąpieli olejowej
  • Amortyzowana, niezależna sekcja wysiewająca
  • Niezależne koło dociskowe
  • Zbiornik z okienkiem do kontroli poziomu nasion
  • Koło do regulacji głębokości:
  • Koło żeliwne Ø 360 mm, szerokość 70 mm, głębokośc siewu 5,0 cm
  • Koło gumowe Ø 400 mm, szerokość 115 mm, głębokość siewu od 0 do 8 cm
  • Brona zagarniająca Ø 12 z hydraulicznym podnoszeniem
  • Kontrola kalibracji
  • Korytko do próby kręconej
  • Oświetlenie (dostarczane zamontowane)
  • Plandeka do ochrony dystrybutorów przed wilgocią i błotem
  • Wolframowy skrobak 70 mm
  • Wymagana liczba obwodów hydrauliki w ciągniku: 2 - 4
  • Hydraulicznie podnoszony wózek transportowy do wersji ciąganej z kołami 400/60-15.5 PR 14
  • Pojemność zbiornika
  • DIRECTA 300 nasiona - 2090 l
  • DIRECTA 400 nasiona - 2880 l
  • DIRECTA CORSA 300 nasiona - 1260 l; nawóz - 830 l
  • DIRECTA CORSA 400 nasiona - 1737 l; nawóz - 1143 l
  • Znacznik (nie dołączony)
  • DP PRONTA 400 przednia sekcja talerzowa
  • DP PRONTA 300 przednia sekcja talerzowa (tylko do wersji z 17 rzędami)
GASPARDO gearbox - Easy and precise Open Close

Sezione Cambio 3 camme

GASPARDO gearbox - Easy and precise

  • Our 3 cam transmission design allows us to acquire maximum accuracy versus many competitors that have a two cam design.
  • Calibration is very time saving using our one handle lever to set the rate.
  • All of our cams and bearings on the gearbox run in an oilbath so that you do not have to worry about greasing them.

Penetration capability Open Close

penetrazione e solco stretto diretta

Penetration capability

The capacity of penetration in difficult conditions is given by the large notched disc (475 mm/18.7in diameter) and thanks to the reduced angle of action creates a groove very thin, thus giving reduced disturbance to the soil. The disks are connected to the frame using heavy arms and sturdy cast steel. Thanks to the hydraulic hitch the transport wheels raise totally off of the ground during field work causing maximum penetration of the units. The spring structure perpendicular to the ground allows the element to follow even very irregular shapes and to keep constant pressure applied to the soil.

Seed depth control Open Close

controllo profondit diretta G

Seed depth control

Thanks to the seeding depth control made of cast steel you will have no problem maintaining a constant depth even in the harshest conditions. The depth limiter is made of a hard cast steel thus helping with the penetration of the disc while making sure that your seed depth is uniform producing an even emergence. Due to weight of the unit we have no problem working well in rocky conditions.  Even wet conditions are not a problem with our tungsten carbide scrapers to keep the heavy soil away from the openers and limiters.

Seeding depth limiters Open Close

depth limiter diretta G

Seeding depth limiters

To vary the depth from 5cm/2in to 3cm/1in all you have to do is change the limiter on the side of the disc.  

Rubber gauge wheel Open Close

diretta rubber unit

Rubber gauge wheel

The rubber gauge wheel systems is for the farmer who like to make adjustments to the seed depth often.  We can do this with a pin adjustment on the side of the unit.  The rubber gauge wheel system is not as suitable as the cast iron unit in very wet heavy soil type conditions.

Furrow closing system Open Close

chiusura solco diretta

Furrow closing system

The closure of the narrow furrow is obtained by a tapered wheel mounted on an arm independent of the unit itself.  This allows for the wheel to move independently of the unit,  running beside the furrow so that there will not be to much compaction over the furrow.  The closing system works very well in rocky conditions. 

Seed and Fertilizer Open Close

tramoggia divisa seme concime

Seed and Fertilizer

The special design of the seed and fertilizer combined drill allows you to optimize the amount of fertilizer used thus reducing overall fertilizer cost.  Our combination unit also reduces the number of passes needed to go over the field.  This will reduce compaction and overall fuel and labor costs.  When comparing our fertilizer distribution to that of a spreader on uneven terrain our drill will give you a uniform application where a spreader unit cannot achieve such results.

2 point hitch Open Close

2 point hitch

2 point hitch

Our cast two point hitch allows for easy hookup and great versatility in the field because of the multiple pivot points.

Pobierz

Dokumenty Wielkość Typ
4.7 MB pdf

Formularz kontaktowy