GCAMPO22 32C

Galeria zdjęć i filmów

Odwiedź nasz kanał YouTube

CAMPO C

TRAILED SPRAYER WITH VERTICAL LIFTING
BOOMS FROM 12 to 24 m, TANKS FROM 1500 to 3200 LITRES.

CAMPO C is ideal for farmers with small fields looking for good autonomy and compact design of vertical boom lifting. Among the 4 models of the series, the smallest has a tank of only 1500 litres: this is an optimal feature to spread the weight of tractor and sprayer on 3 axles, reducing in this way soil compaction. This solution was studied specifically for horticultural growers, always careful to soil health.

All models have a compact vertical hydraulic lift system: lifting range is 1000 mm in smaller machines, 1400 mm on 2200 and 3200 tanks. A nitrogen accumulator is connected to the lifting cylinder to guarantee boom dampening. CAMPO C is available in different version with manual, electric or computer assisted (standard or ISOBUS) pressure control unit. Air sleeve can be installed when the sprayer is featured with ALA 500 or 600 boom.

Wersja Tank capacity (LITRES) Boom width (METERS) Pump (l/min - bar) Track width (mm) Boom lifting (mm) Boom sections
15 1700 12-18 160-20 or 220-20 1400 - 2100 1000 5
20 2100 12-18 160-20 or 220-20 1400 - 2100 1000 5
22 2400 18-22 250 - 20 1450 - 2100 1400 5
32 3200 18-22 250 - 20 1450 - 2100 1400 5
  • Tri-jet nozzles
  • PTO shaft
  • Centralized control panel (on 2200 and 3200)
  • Foam row marker (only on 1500 and 2000)
  • Filling pipe (50 mm) 8 m (only on 1500 and 2000)
  • Agitation circuit
  • Clear water tank
  • hand washing tank
  • Inner tank 360° spinning nozzle
  • DEVIOKIT
  • Hydro-pneumatic boom dampener
  • Pre-mixer
  • Versions with manual control, electric o computer managed
  • 230/95-R36 tyres
  • Filling pipe, 8 m (50 mm) with floating filter (for 2200 and 3200)
  • Foam row marker  (for 2200 and 3200)
  • PTO independent circuit
  • Computer Easy-spray (ISOBUS – Basic terminal)
  • GPS row marker (on non ISOBUS computer)
  • ISOBUS monitor 
  • 230/95-R44 tyres
  • 270/95-R44 tyres (for 2200 and 3200)
  • 270/95-R48 tyres (for 2200)
  • 300/95-R46 tyres 
  • 340/85-R38 tyres (for 2200)
  • 340/85-R48 tyres
  • 380/85-R28 tyres (for 2200)
  • 420/85-R38 tyres (for 2200 and 3200)
"ALA 600" BOOM Open Close

ALA 600

"ALA 600" BOOM

ALA 600 is the boom with side folding of last section, available in working widths up to 24 m: this particular configuration prevents any possible accident from hitting high tension lines. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting.

 

AVAILABLE WIDTHS

18-19-21-22-24 m FORPOMPEO S2200/S3200

18-19-21-22-24 m FOR POMPEO P2200/P3200

18-19-21-22 m FOR SIRIO 2200/3200

18 m FOR SATURNO 800/1000/1200

"ALA 500" BOOM Open Close

ALA 4

"ALA 500" BOOM

Model with working widths between 15 and 22 m, last section of the arms folds upwards allowing to easily overcome side obstacles. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and hydraulic lifting.

 

AVAIALBLE WIDTHS

18-19-21-22 m FORPOMPEO S2200/S3200

18-19-21-22 m FOR POMPEO P2200/P3200

18-19-21-22 m FOR SIRIO 2200/3200

15-16-18 m FOR SIRIO 1500/2000

18 m FOR SATURNO ONE 1300/1600/1900

15-16-18 m FOR SATURNO 800/1000/1200

"ALA C" BOOM Open Close

ALA C

"ALA C" BOOM

The basic model from the “ALA” family:  when closed the boom is folded sideward along the main tank; working widths are 16 or 18 m. With second arm section folding upwards is possible to easily overcome side obstacle at the edge of working width. Standard feature includes single-jet nozzles with quick release.

 

AVAILABLE WIDTHS

16-18 m FOR SIRIO 1500/2000

"WORK U" BOOM Open Close

work u

"WORK U" BOOM

 

Work U boom is a model with hydraulic folding; during transport closed boom is folded rear vertically. Self-levelling is a standard feature, as the hydraulic 1000 mm lifting (1400 on SATURNO ONE and SIRIO models); optionally on mounted sprayer is available the boom dampening.

 

AVAILABLE WIDTHS

12-14-15-16-18 on SIRIO 1500/2000

14-15-16-18 m on SATURNO 800/1000/1200

12-14-15-16-18 on GIOVE 800/1000/1200

CENTRALIZED CONTROL PANEL: ORDER BEFORE ALL! Open Close

foto 004

CENTRALIZED CONTROL PANEL: ORDER BEFORE ALL!

The control panel groups all the functions of the machine: all levers and main controls are clustered on the left side with clear indication for suction and delivery valves. Pre-mixer and hand-washing tap are very close to main panel to ease any operation in preparing treatment.

Control unit Open Close

elettrovalvole di controllo delle sezioni

Control unit

Pressure control units are available on 3 levels: manual, electrical or computer assisted (see table pag 23). Mechanical ones have a remote general switch to control the ON/OFF function from the driver’s seat. Machines with the electric pressure adjuster have a set of electro-valves to control all the booms movements from a console installed in the cab; with this solution a single double effect oil fast plug is required.

CLEANING KIT Open Close

deviokit

CLEANING KIT

Cleaning kit makes easier all operation at the end of the field work. Complete kit has 2 spinning nozzles for internal main tank cleaning (STANDARD) and high pressure cleaner gun (OPT) for external tank and boom cleaning. When spraying operation are temporary suspended and there is the need to rinse the circuit, DEVIOKIT by pass system avoids any dilution of product in half-filled main tank.     

AIR FLOW (optional) Open Close

manica

AIR FLOW (optional)

AIR FLOW improves work capacity of machine, allowing it to operate even in presence of wind up to 6/8 km/h (20-28 km/h). Spraying drift is reduced of 90%. Turbolence and and small returning upwards flows move foliage, allowing product to reach lower vegetation and lower page of leaves, normally not involved by treatment. With this feature is possible to reduce application volume and product rate per hectare, enanching tank operating range and bringing economic benefits to the farmer.

AIR FLOW is powered by an hydraulic motor and has, with no price surcharge, possibility to  adjust air speed (from 0 to 115  km/h), to best adapt to working conditions.

Dampened boom Open Close

sospensione barra

Dampened boom

All Booms for SIRIO and POMPEO can be provided of an hydro-pneumatic dampener with nitrogen accumulator to reduce at the best bouncing from working on uneven soils.

30 liters mixer Open Close

Premixer

30 liters mixer

The pre-mixer reduces contact with hazardous chemicals during preliminary operations, and begins product dilution with flow from the main tank. Bottle-cleaner nozzle allows to use 100% of product, reducing the wastes in empty bottles. A smart parallelogram with spring lock takes the basket in comfortable position for the user to pour product and move levers, at the end of preparation the pre-mixer moves back close to main tank.

Pobierz

Dokumenty Wielkość Typ
3.5 MB pdf

Formularz kontaktowy