CAMILLA
PROFESSIONAL HEDGE AND VERGE MOWER WITH HIGH PARALLELOGRAM CONNCETION
CAMILLA è un braccio decespugliatore professionale adatto allo sfalcio di erba, arbusti e cespugli, sia in campo che per manutenzione stradale. Disponibile in 3 versioni - 500, 550 e 600T - dispone di un attacco alto a parallelogramma che permette, agendo sul cilindro del primo braccio, di eseguire due movimenti contemporaneamente, mantenendo sempre il braccio a contatto col terreno.
| Versión | Extensión (cm) | Cabezal | Peso (KG) | Mín Peso Tractor (KG) | Potencia (HP) | Aceite hidr. | Rotor (rpm) | Pot. máximo mot. hidr |
|---|---|---|---|---|---|---|---|---|
| 500 | 500 | 120/05 | 950 | 2300 | 60 | 170 | 3000 | 40 |
| 550 | 530 | 120/05 | 1000 | 3000 | 70 | 200 | 3000 | 58 |
| 600T | 610 | 120/05 | 1250 | 3000 | 80 | 200 | 3000 | 58 |
- Independent hydraulic circuit with high-efficiency cast iron gear motor and pumps Max. 540 rpm PTO
- Cast iron overdrive with high-efficiency category 3 (CAMILLA 450, 500) Cutting head angle 246°
- Cast iron coupling with 2 inlets for pumps on indepenent shafts (on 550 version)
- High resistance hydraulic pipes, protected by metal guard and shockproof/splash proof spiral wrapping
- Hydraulic valve system operated by flexible cables and control unit with mechanical levers
- Pre-engineered space for future installation of the heat exchanger
- High-strength chassis pre-engineered for 3-point hitching to cat. ll power lifts
- Ground pins made of hardened and heat treated steel
- Wear-resistant bushings with lubricating nipple
- Safety system with first arm “OVER CENTER"
- Safety hydraulic system with hydro pneumatic dampener and max safety valve on the rotation hinge cylinder
- Safety valve for unloading in case of rotor blockage
- PTO shaft
- Safety lever to prevent the rotor from reverse spin
- Cutting head angle 246°
- CE equipment
- Lighting kit (standard on 550)
- Lighting Kit
- Kit blower
- Heat exchanger
- Pair of third-point connections
- Kit brackets (CAMILLA 450, 500)
- Proportional Electric Joy-Stick JSPE (CAMILLA 450, 500, 550)
- Proportional hydraulic Joy-Stick JSPH (CAMILLA 450, 500, 550)
- Customizable quick-hitch
Mechanical Shock absorbance
In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine. A mechanical dampener protects the arm when an obstacle is hit
Strong junctions
All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.
Cutting head
Head of hedge cutters permits maximum working flexibility, thanks to its rotation angle of 246°; balanced rotor warrants absence of vibrations.
Hydraulic shut off
Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.
Safety systems
In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.
A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.
Reversible rotor
It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.
