22_0_c.jpg

Foto & Video Gallery

C

44-96 kW (60-130 HP)
CON CAMBIO VELOCIDAD

The model C rotary tiller is an implement with a wide variety of uses, suitable for medium/large farms and medium power tractors.
The preparation of the ground after plowing, the working in of stubble and crop residues, the mechanical control of weeds, the breaking up of established grassland, direct preparation without plowing - these are only some of its many possible uses.

Versión
Anchura de trabajo
cm
espacio ocupado
cm
Profundidad de trabajo
cm
Número de herramientas
nr.
205 44-96 / 60-130 210 223 27 48
230 52-96 / 70-130 235 248 27 54
250 59-96 / 80-130 260 273 27 60
280 63-96 / 85-130 285 298 27 66
300 74-96 / 100-130 310 323 27 72
  • Cambio de velocidades T.d.f. 540/1000 r.p.m.
  • Revoluciones rotor T.d.f. 540 r.p.m. (4v): 175-214-262-143
  • Revoluciones rotor T.d.f. 1000 r.p.m. (2v): 324-356
  • Junta cardán con embrague (horquilla lado tractor 1” 3/8 Z6)
  • Transmisión lateral de engranajes en baño de aceite
  • Enganche universal de 3 puntos, cat. II
  • Enganches barras delanteros desplazables
  • 6 azadas helicoidales por disco (las azadas laterales están orientadas al interior)
  • Reguladores de bonete de muelle
  • Par patines
  • Soporte rodamientos del rotor "Duo cone" con sellos mecánicos anfibios
  • Protecciones de seguridad "CE"
  • Versión con azadas externas (bajo pedido)
  • Juego de borrahuellas
  • Dos ruedas delanteras para regulación de profundidad
  • Par de ruedas laterales Ø 500 m
  • Diente externo para limpiar los flancos
  • Reja de profundidad de disco lateral derecha (cad)
  • Reja de profundidad de disco lateral izquierda (cad.)
  • Kit tapa de proteccion carter y patin lado externo para utilizar el rodillo *
  • Kit patines anti-desgaste
  • Enganche sembradora hidráulico
  • Adaptador para tercer punto tipo "USA", cat. III (tercer punto rapido)
  • Recargo junta cardán excéntricas
  • Recargo para T.d.f. trasera (no suministrable por separado)
  • Recargo para contra-brida de 205 a 250
  • Recargo para contra-bridas 280-300
Easy rotor rpm settings with the multispeed gearbox Open Close

Rotor rpm setting

Easy rotor rpm settings with the multispeed gearbox

Working speed could be easily set by changing the gears inside the PTO gearbox. The user may select the most suitable rotor rpm according to soil conditions.

Enlarged rear rollers for optimal seedbed preparation Open Close

Mor4100

Enlarged rear rollers for optimal seedbed preparation

The rear rollers are characterized by a greater width than the rotor allowing a perfect seedbed levelling.

Side gear drive in oil bath Open Close

Side gear drive

Side gear drive in oil bath

3 heavy duty gear drives running in a sealed oil unit to give constant lubrication during work  and to ensure high performance even in prolonged and hard soil tillage.

Low maintenance Open Close

DUO CONE2

Low maintenance

The new Duo-Cone sealing system guarantees reliability without the need for maintenance. You can achieve at least 50% longer life from the Duo-Cone system than standard sealing systems in the most demanding working environments.
The sealing system is completely waterproof or “amphibious” allowing the rotor and bearing to run in its own oil supply, this allows the rotor to work and be reliable in the dustiest of environments or even work immersed in water and yet the seals will still prevent water and dust ingress into the rotor and hubs.

Strengthen Windingshape levelling bonnets Open Close

SC Maccarese14.07.2005 06

Strengthen Windingshape levelling bonnets

The levelling bonnet comes as standard complete with a sprung mechanical rod that puts constant downward pressure on the bonnet and acts as a shock absorber protecting the bonnet from damage, whist working in stony conditions. The springs on the pressure rod that is connected to the rear levelling bonnet increase the machine stability at work.

Download

Documento Peso Tipo
8.6 MB pdf