KATIA

REAR MOUNTED LAND-CLEARING MACHINE WITH ADVANCED ARM
WITH SIMULTANEOUS ARMS OPEN/CLOSE COMPASS SYSTEM

KATIA è un braccio decespugliatore professionale adatto allo sfalcio di erba, arbusti e cespugli, pensato per manutenzione stradale dove è necessaria la massima attenzione. Equipaggiata con un sistema di avanzamento idraulico che rende più confortevole e veloce il lavoro.

Version Extension (cm) Standard Shredder head Weight (KG) Min. Tractor weight (KG) Power (HP) Hyd Oil Rotor (rpm) max Hydraulic engine
550 540 125/05 1050 3500 80 200 3200 58
650 625 125/05 1200 3800 100 220 3200 58
  • Independent hydraulic circuit with high-efficiency cast iron gear motor
  • and pumps.
  • Max. 540 rpm PTO
  • Cast iron overdrive category 3 (KATIA 450)
  • Cast iron coupling with 2 inlets for pumps on independent shafts (on
  • 550 version)
  • High resistance hydraulic pipes, protected by metal guard and
  • shockproof/splashproof spiral wrapping
  • Hydraulic valve system operated by flexible cables and control unit with
  • mechanical levers
  • Pre-engineered space for future installation of the heat exchanger
  • High-strength chassis pre-engineered for 3-point hitching to cat. II
  • power lifts
  • Ground pins made of hardened and heat treated steel
  • Wear-resistant bushings with lubricating nipple
  • Safety system with first arm “OVER CENTER”
  • Safety hydraulic system with hydropneumatic dampenere and max
  • safety valve on the rotation hinge cylinder
  • Safety valve for unloading in case of rotor blockage
  • PTO shaft
  • Safety lever to prevent the rotor from reverse spin
  • “CE” equipment
  • Cutting head angle 246°
  • Lighting kit

 

  • Heat exchanger (KATIA 450)
  • Heat exchanger (KATIA 550)
  • Kit brackets
  • Pair of third-point connections 
  • Proportional electric Joystick JSPE
  • Proportional hydraulical Joy-Stick JSPH
  • Customizable quick-hitch
  • POWER KIT with pump and engine with closed circuit pistons, heat exchanger and belt transmission DP 125
Cutting head Open Close

cutting hedge4

Cutting head

Head of hedge cutters permits maximum working flexibility, thanks to its rotation angle of 246°; balanced rotor warrants absence of vibrations. 

“Avant” cutting head Open Close

testata avant

“Avant” cutting head

The particular conformation of the arm gives to the user optimal sight on cutting head, great control and the best operating comfort.  With this arm, cutting head can work on side, close to tractor wheel, or behind it: machine is therefore adapt to work in very narrow street.

Safety systems Open Close

shock absorber

Safety systems

In case of sudden rotor arrest, a safety valve drops pressure from hydraulic engine to prevent any damage.  

A double safety system is active when the arm encounters any obstacle. First protection is a nitrogen dampener working with a hydro-pneumatic circuit. If first system is not sufficient a max safety valve, acting on a cylinder, turns back 90° the arm.

Strong junctions Open Close

hinges

Strong junctions

All hinges have pins made of hardened, heat-treated steel; bushings are wear resistant and provided of lubricating nipples.

Hydraulic shut off Open Close

shut off cocks

Hydraulic shut off

Hydraulic circuit can be blocked by shut-off valves: this allows user to perform safely maintenance operations, without any dangerous accidental movement of the arm.

Contour Following System (CFS) Open Close

CFS

Contour Following System (CFS)

Floating head allows user to follow uneven ground contours without acting on motion control. A safety system limits maximum head oscillation so, in case of sudden level drop, risk of head falling or tractor overturning are prevented.  

Iron cast coupler Open Close

iron cast coupler

Iron cast coupler

This device splits power from PTO on two independent shafts moving pumps for rotor and hydraulic circuit. This solution makes possible use hedge cutter even in heavier condition with maximum reliability.

Reversible rotor Open Close

anti inversion lever

Reversible rotor

It’s possible to invert spin direction of rotor: this makes the machinery suitable both to cut grass, shrubs (clockwise spin) and operate close to water along rivers (anticlockwise spin). To prevent any accidental inversion, the lever for this function has a safety block.

Request Form