CAMPOP USA

Photo & Video Gallery

Visit our Youtube channel

CAMPO P

TRAILED SPRAYER WITH PARALLELOGRAM BOOM LIFTING
BOOMS FOR 59 TO 92 FT., TANKS 581 or 845 GALLONS.

CAMPO P has been designed to satisfy the most demanding farmer. Its main strength is the parallelogram boom lifter with 5 ft. of range, dampened by a nitrogen accumulator system. With this configuration it is possible to match the machine to wider booms , up to 118 ft. The sprayer is a top range machine and can be featured to different levels: pressure control unit is available from manual version to ISOBUS computer. The air sleeve can be installed on demand on both 581 or 845 gallons tanks, maximum working width of it is 92 ft.

Version Boom sections Tank capacity (GALS) Boom width (FT) BOOM LIFTING (IN.) PUMP FLOW (GAL/MIN - BAR) TRACK WIDTH (FT)
22 5-7-9 581 59-91 59 66-20 59-83
32 5-7-9 845 59-91 59 66-20 59-83
  • Tri-jet nozzles
  • PTO shaft
  • Centralized control panel
  • Agitation circuit
  • Clear water tank
  • hand washing tank
  • Inner tank 360° spinning nozzle
  • DEVIOKIT
  • Hydro-pneumatic boom dampener
  • Pre-mixer
  • Versions with manual control, electric o computer managed
  • 270/95-R44 tyres (for 581)
  • 270/95-R48 tyres (for 845)
  • Filling pipe, 26 ft. with floating filter
  • Foam row marker 
  • PTO independent circuit
  • Computer Easy-spray (ISOBUS – Basic terminal)
  • GPS row marker (on non ISOBUS computer)
  • ISOBUS monitor
  • Tyres 230/95-R44
  • Tyres 270/95-R44
  • Tyres 270/95-R48 (only for 581)
  • Tyres 300/95-R46
  • Tyres 340/85-R38 (only for 581)
  • Tyres 340/85-R48
  • Tyres 380/85-R28 (only for 581)
  • Tyres 420/85-R38
ALA 700 boom series Open Close

assets/

ALA 700 boom series

ALA 700 features bigger sprayers as large as 105 ft. of working width. Last section folds sideways with no risk of accident involving high tension cables. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 5 ft hydraulic lifting. Hydro-pneumatic dampening is installed on cylinders of parallelogram. 

 

ALA 600 boom series Open Close

ALA 600

ALA 600 boom series

ALA 600 is the boom with side folding of the last section, available in working widths up to 79 ft.: this particular configuration prevents any possible accident that results from hitting high tension lines. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 5 ft. hydraulic lifting.

 

ALA 500 boom series Open Close

ALA 4

ALA 500 boom series

Model with working widths between 49 ft and 72 ft, last section of the arms folds upwards allowing side obstacles to be easily overcome. Boom is featured with the hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and hydraulic lifting.

 

 

Easy-accessible and logic control pannel Open Close

foto 004

Easy-accessible and logic control pannel

The control panel groups all the functions of the machine: all levers and main controls are clustered on the left side with logic indications for suction and delivery valves. Pre-mixer and hand-washing tap are very close to the main panel to ease any operation in preparing treatment.

 

 

Pressure unit controll Open Close

elettrovalvole di controllo delle sezioni

Pressure unit controll

Pressure control units are available on 3 levels: manual, electrical or computer assisted. Mechanical one has a remote general switch to control the ON/OFF function from the driver’s seat. Sprayers with the electric pressure adjuster have a set of electro-valves to control all the booms movements from a console installed in the cab; with this solution a single double effect oil fast plug is required.

 

Boom dumpening system Open Close

sospensione barra

Boom dumpening system

SIRIO has a nitrogen accumulator directly connected to the cylinder of the vertical lift; on CAMPO this device is part of the circuit of parallelogram lifting. Boom dampening takes part to oscillation reduction and prevents damages from mechanical solicitations on most rough soils.

 

 

Boom stabilizer Open Close

stabilier

Boom stabilizer

To spray chemicals uniformly, it is a primary issue to keep the boom stable and always parallel to the soil. The stabilizer device has a key role in matching this target, especially when operating at high speeds. On trailed machines, booms are hung with single-hinge or parallelogram devices between boom and frame connection. Oscillations are reduced by gas-pistons or return-springs.

 

 

Air flow (optional) Open Close

manica

Air flow (optional)

This device reduces treatment drift, avoiding any damage or contamination to non-target crops. Tthe air stream “opens” the canopy and allows product to penetrate in th elower layers of vegetation, for a better pest control.

The air flow is made by a fan  with a diameter of 27 ½ in. or 31 ½ in.: air speed can be adjusted from 0 to 71 mph through a potentiometer on spraying computer. An additional cylinder can vary the angle of the air flow to change incidence of the air flow. The fan is fed by an independent hydraulic circuit connected to PTO shaft.

 

Deviokit Open Close

deviokit

Deviokit

The Deviokit system, standard on all machines, allows the water circuit to be cleaned without any product dilution in the main tank: field operations can thus be stopped and backed up later with no risk of product clogging in the pipelines.

 

 

8 gal. pre-mixer Open Close

Premixer

8 gal. pre-mixer

The pre-mixer reduces contact with dangerous chemicals during preliminary operations, and begins product dilution with flow from the main tank. The bottle-cleaner nozzle allows 100% of the product to be used, reducing the waste in empty bottles. A smart parallelogram with spring lock takes the basket in comfortable position for the user to pour product and move levers, at the end of preparation the pre-mixer moves back close to the main tank.

 

 

Steering track Open Close

steering

Steering track

These solution allows the sprayer to follow the tractor track. Reduction of plant crushing will improve productivity from field headlands and at the same time avoid spreading of infection from parasites affecting damaged plants. Steering drawbar in semi-mounted configuration is available on SIRIO and POMPEO models up to 845 gal. tank capacities. Larger machines (POMPEO S 4200 and 6000) are featured with steering axle managed by the ISOBUS system.

 

 

Request Form