EXTREME 3

Photo & Video Gallery

Visit our Youtube channel

EXTREME 265 - 280

The HT series round baler produce bales 4-ft wide and up to 6-ft tall. The bale diameter can be adjusted from 1½-ft up to 6-ft meet feeding and handling requirements. The soft core, diameter can be adjust from 0 to 4 ft. The extra-wide pick-up (up to 87 in.) with four different feeding systems (HT: alternative feeder, HTR: feed rotor, HTC, HTU feed cutters) are warranty of short chop, high compaction and low oxygen in the bale. The over-sized drive chains ensure durability, longer life, and greater uptime.

  • Bale dimensions: 4 x 4, 4 x 5 or 4 x 6 ft.
  • Four different feeding systems:(HT: alternative feeder, HTR: feed rotor, HTC, HTU feed cutters)
  • 6 belts, 7 in. wide
  • Variable chamber and geometry with 4 softcore diameters manually adjustable
  • EASYTRONIC monitoring unit
  • Hydraulic compression with density electronic regulation
  • Clutch PTO shaft
  • Bale diameter electronic control
  • Hydraulic bale pressing
  • Automatic chain lubrication
  • 79 in. pick up with hydraulic lifting system
  • Loading signals
  • PTO rpm 540
  • Ligth kit
  • Tires 400/60-15,5
  • Twine, net or twine+net binding systems
  • Bale ejector
  • Pick-up of 87 in.
  • Clincher Mato Profi 5
  • Clincher Mato Profi 19
  • Electric management for pressure and variable geometry
  • Roll holder brackets
  • Film wrapping system
  • Couple of shrinking cups (recommended for green hay)
  • Additional housing for twine
  • Hydraulic brakes
  • Constant velocity universal joint with cam torque
  • Tires 19.0/45.17
EASY TRONIC Open Close

FEASYTRONIC2

EASY TRONIC

 

Simple and easy controller gives all the key functions to bale fast:
-Baling control: indicators alert you when size is reached, wrapping begins and ends, when the bale is ejected.
-Bale density: you can set a constant pressure chamber or adjust separately the core, central and outer layers of the bale.
-Wrapping: let you choose twine or net wrap, with the option to manually start wrapping undersized bales.
-Assistance: warning indicators alert if the gate is left open or if there’s a problem in the wrapping process.

 

 

STANDARD FEED ROTOR Open Close

foto 6

STANDARD FEED ROTOR

 

HTR models, that do not feature a cutting system, have a standard feed rotor which feeds the baling chamber continuously, increasing the working speed regardless the windrow size and humidity.

 

 

TOUGH BELTS Open Close

foto 28

TOUGH BELTS

The baling chamber is featured with six 3-layer belts (7" wide) in order to surround the entire width of the bale reducing crop loss and maintaining crop quality.

 

 

WRAPPING SYSTEMS Open Close

FLEGATURAF+Rv3

WRAPPING SYSTEMS

EXTREME series feature with net, wire or combo (net+wire) wrapping systems as standard.

CUTTER ROTOR Open Close

foto 27

CUTTER ROTOR

 

HTC models are equipped with 15 cutter knives positioned in a double spiral near the rotor for superior cutting quality. Special knives can be added on the cutter in order to disengage the chopping system.

 

 

AUTOMATIC CHAIN OILING Open Close

olio

AUTOMATIC CHAIN OILING

The automatic chain lubrication system benefits from a large oil tank. All lubrication points are clustered in easy-access lubrication banks, making service and maintenance less timeconsuming and more convenient.

 

 

ALTERNATIVE FEEDING ROTOR Open Close

foto 5

ALTERNATIVE FEEDING ROTOR

On HT models, just on the back of the pick-up, the feeding system is characterized by an alternative feed rotor (up to 16 teeth - pitch 2” ¾), suggested for short and dry hay. The pick-up as standard is equipped with an hydraulic lifting system.

 

 

ULTRACUT ROTOR Open Close

foto 7

ULTRACUT ROTOR

 

The FERABOLI UltraCut rotor cutter features 25 knives to produce short cuts that pay off quickly by higher bale densities, enhanced silage quality as well as easier and faster bale break-up on the feeding floor.

 

 

Request Form